01225 650190

01225 650190

Showroom open Monday – Friday 9am – 1pm or by appointment.

Taps

Taps

Single Faucet

Available in chrome or brushed nickel finish.

If you have a normal sink tap and don’t wish to change it, you can add filtered water with a single faucet fitted to the side of your sink.

Water regulations require that a tap is fitted over a drain but, in cases where there is no sink, we can provide a drain to fit under the spout of the faucet, provided that we can run a drain pipe to a suitable outlet.

Single faucet taps

Double Faucet

Available in chrome finish.

A double faucet is suitable for situations where more than one new outlet is required, but changing a whole tap to a combination outlet (such as a Quooker) is not practical or affordable.

Double faucets allow two different streams of water, for example, it can be used for chilled water and sparkling water, or for chilled and room-temperature water.

 

Double faucet taps

Tri-flow Taps

The tri-flow (or 3-way) tap is often recommended when a water softener is fitted, to give the user a choice, normally between softened and unsoftened cold water (the hot water isnormally always softened). The unsoftened cold water can be filtered if necessary, and it is suitable for adding a chiller or a chiller/sparkling water unit.

In most homes, the cold water tap on a kitchen sink is the most used tap in the property. Therefore , softening the water from that tap gives maximum benefits for most uses of that water, whilst at the same time improving the economics of the softener purchase. And having the choice of unsoftened water at the same time, offers a choice on every occasion.

Dolomite Tri-flow Flexi Hose Tap

Available in Brushed Brass, Chrome Plated, Matt Black and Brushed Nickel.

518122 FWL Dolomite 3 Way Filter Tap Brushed Brass PVD
518124 FWL Dolomite 3 Way Filter Tap Chrome Plated
518126 FWL Dolomite 3 Way Filter Tap Matt Black
518128 FWL Dolomite 3 Way Filter Tap Brushed Nickel PVD

Cottage Tri-flow Tapp

Available in Brushed Brass, Chrome Plated, Brushed Nickel and Brushed Bronze.

518114 FWL Cottage 3 Way Filter Tap Brushed Brass PVD
518116 FWL Cottage 3 Way Filter Tap Chrome Plated
518120 FWL Cottage 3 Way Filter Tap Brushed Nickel PVD
518118 FWL Cottage 3 Way Filter Tap Brushed Bronze

Modern Tri-flow Tap

Available in Brushed Brass, Chrome Plated, Matt Black and Brushed Nickel.

518102 FWL Modern 3 Way Filter Tap Brushed Brass PVD
518104 FWL Modern 3 Way Filter Tap Chrome Plated
518106 FWL Modern 3 Way Filter Tap Matt Black
518108 FWL Modern 3 Way Filter Tap Brushed Nickel PVD

Classic Tri-flow Tap

Chrome Plated

518112 FWL Classic 3 Way Filter Tap Chrome Plated

Classic Tri-flow Tap

Brushed Nickel

518110 FWL Classic 3 Way Filter Tap Brushed Nickel PVD

Altea Tri-flow Spring Hose Tap

Brushed Brass

518012 Altea Tri Flo Tap

Aqualaria Tri-flow Tap

Brushed Brass

518010 Aqualaria Tri Flo Tap

Chiller Units

Chiller Unit – Small

Suitable for small families, this unit will produce chilled water between 3° – 6° C and will supply approximately 1.2 litres before the water warms. Recovery time is approximately 15 minutes.

This unit might require ventilation.

Chiller Unit – Medium

Suitable for larger families, this unit will produce chilled water in the range of 3°-10° C if the incoming water is no higher than 20° C and room temperature is no more than 25°C. This unit will supply up to 15 litres / hour with one litre taking approximately 40 seconds based on incoming pressure of 3 bar.

This unit will require ventilation.

Chiller Unit and Sparkling Water Unit – Medium

Same as Chiller Unit –  Medium but with a carbonator unit that can carbonate 0.5 litres at any one time.

This unit will require ventilation.

Filters

We sell filters from 2 different ranges:

The Omnipure range is a simple filter system which allows the user to simply unscrew the filter and replace it. Filters are suitable for 6-month or 12-month use, making them economical when compared to other ranges and filter jugs.

Omnipure

The Pentek range consists of filters which fit inside a standard housing. The housings can be combined to make multiple sets of different filters. These filters generally last for 12 months in the UK but that depends on volume of use.

Water Purifiers

Reverse Osmosis – Pure Water

Reverse osmosis (RO) water purifiers provide  exceptional water purity. The RO process removes approximately 95% of contaminants such as chlorine, lead, fluorides, bacteria and viruses, as well as unpleasant tastes and odours from water. The result is a highly pleasing, fresh tasting drinking water.

Traditional RO systems operate on mains water pressure using a semi-permeable membrane, which traps impurities and washes them down the drain. The pure water is collected and stored in a tank for use at a later time.

The downside of the RO system is the amount of water needed to wash away the contaminants; some systems waste 9 litres of water to produce just one litre of purified water.

Compact 75 RO Unit

The Compact 75 Water Purifier can produce up to 11 litres per hour of pure drinking water, using just 1.75 litres of wash water to produce each litre of pure water.

The Compact 75 has easy-to-change filter cartridges and includes a cartridge life indictor.  Filter life is approximately 12 months. The membrane can last as long as 3 years with softened water.

This unit has a storage tank which holds approximately 3.5 litres and will provide up to 3 litres/ min to a tap.

Direct 800 RO Unit

The Direct Flow 800 system produces pure drinking water on demand at a flow rate of 2 litres per minute. The system monitors and displays both the feed water quality and the purity of the drinking water in real time.

As the Direct Flow 800 does not use a storage tank, there is no possibility of stagnation, temperature gain and tank failure/contamination.

Filter life is approximately 12 months. The membrane can last as long as 3 years with softened water.